e-mail home equipments
Rus Eng
       
Site map | Contacts
Home Price list Order
EQUIPMENT
Our company
Directions of activities
Certificates and licenses
Orders and consultations
New developments
Equipment
Service maintenance
News
Exhibitions and training
Projects
Reference list
Price list
  THYRISTOR CONVERTERS EK-TP FOR DC MOTORS


PURPOSE

     Thyristor converter (cabinet EK-TP) is intended for regulation of rotation frequency in DC motors with independent excitation. To maintain speed feedback, sinusoidal and digital encoders or analog tachogenerator are used. In case accuracy in the certain limits (low) is necessary, armature EMF could be used for feedback.

     Cabinet EK-TP can be used in many industries including the paper, textile, printing industry, processing of plastic, manufacturing of rubber, metal working etc.

STRUCTURE OF LEGEND

EK ТP XXX - XXX - XK
        Quadrantness
        Nominal armature current EDC, A
        Nominal armature voltage EDC, V
        Thyristor converter
        Energocomplekt


     Nominally, cabinet EK-TP is made in climatic modification UHL and category of accommodation 4 with the following influencing climatic factors:

  • ambient temperature from 0 0C up to +35 0C (can be increased on inquiry);
  • height above sea level up to 3,000 m;
  • relative humidity 80% at most, at temperature +25 0C.

         Concerning conditions of operation regarding mechanical factors, cabinet EK-TP belongs to group of mechanical version М39; thus, acceleration of vibration of a room floor should not be excess 2.5 m/s2 at frequencies in the range from 0.5 up to 100 Hz, degree of rigidity – 8. Degree of cabinet protection – IP43 (can be increased) in accordance with GOST 14254-96.

    CONTENTS

         Cabinet EK-TP represents structurally completed block; its equipment list includes: TP of series TPD32 (SIEI, Italy), input reactor, power terminals and terminals for control signals input (Phoenix Contact, Germany), automatic switches (General Electric, USA) for protection of drive and control logic circuits. Controls and signal systems are mounted at the cabinet door (various variants of elements are possible depending on customer’s requirements). Cabinets made by Areta (Italy) or by Rittal (Finland) are used for mounting of all the elements.

    MAIN SPECIFICATIONS

  • Power supply voltage / maximal output voltage (V)
         - for double quadrant 380/470, 500/600, 690/810
         - for four quadrant 380/440, 500/540, 690/710
  • Range of nominal output currents: 20 – 3200 A
  • Operation temperature (standard): from +1 0С up to 40 0С
  • Storage temperature: from –20 0С up to 55 0С
         Protection from:
  • motor overload;
  • short circuit currents;
  • inadmissible decrease and increase of input voltage;
  • overheating of converter’s radiator.






    CABINET EK-TP PROVIDES:

  • automatic control by frequency of rotation (torque) of the electric motor by feedback from the sensor practically of any technological parameter, by signal from the automatic control system, or by orders of the operator;
  • deenergizing of the electric motor in a cabinet: its long overload on time, short circuit;
  • automatic transition to a feedback by armature EMF in case of signal feedback breakage by speed (only in the constant torque mode).
  • fast reversal rotations of motor;
  • automatic restart of the system after power supply failure (by order);
  • possibility to connect several cabinets on a uniform technological process (cabinets of special embodiment; installation of the industrial controller is required at presence of several feedback signals on technological parameter (in one of the cabinets or in a separate cabinet)).

    •      Fig. 1. Cabinet EK-TP-440-390-4К
    Download page    Version for printing   
       Medium-voltage power-driven equipment
    EK-AV6 EK-AV6 frequency drive for medium voltage synchronous and asynchronous electric motors with square-cage rotor
    EK-AV6 EK-AV6 soft-start device for medium-voltage engines
       Field systems
    SUV SUV series automatic excitation regulator for brushless turbo- and hydrogenerators
    SVBG SVBG series brushless field systems for hydrogenerators
    EX-SR EX-SR static exciter for synchronous engines
    STS STS static thyristor excitation systems for turbo- and hydrogenerators
    AVR AVR automatic excitation regulator for synchronous brushless diesel-generators and engines
    SUDG SUDG diesel-generator control system
       Power-driven equipment
    EK-CRP Frequency converter EK-CRP for induction motors
    AVy Frequency converter
    AVy (SIEI, Italy)
    EK-TP Thyristor converters EK-TP for dc motors
       Systems
    Automatic loading station for loading light mineral oil in railway tanks Vapor recovery system (VRS) Thermal power station for live steam production of EP-300 unit
    Packet forming line according to pallet mollers scheme SUGP-0.5EX polyethylene granulator control system TOPAS filling machine
    		Энергокомплект, Высоковольтный частотный привод, ЧРП, вчрп, стотный привод, чрп, Высоковольтный плавный пуск, Возбудители серии EX-SR, впп, бесщёточная система возбуждения, преобразователь частоты, для высоковольтных асинхронных и синхронных двигателей, ВПП, плавный пуск, Системы возбуждения теристорные, системы возбуждения. устройства управления стартер-генератором, для беcщеточных дизель-генераторов и двигателей, автоматический регулятор возбуждения, статические тиристорные системы возбуждения, высоковольтный частотный привод, бесщёточная система возбуждени, устройство плавного пуска, рекуперация паров, система очистки воздуха, наливная эстакада, нефтеналивка, автоматического регулятора возбуждения, системы управления, EX-SR, Система автоматического управления дизель-генератором СУДГ, допустимые нормы, устройство плавного пуска, УРП, АУТН, тактовый налив нефти, тепловая электростанция. технологический пар, асинхронных электродвигателей, устройства управления стартер-генератором    
     
    St. Petersburg
    E-mail: s@energocomplekt.ru  tel./fax (812) 320-96-20, 320-96-21